0 votes
asked by (12 points)
I've been enjoying X-Plane since I bought it a couple of weeks ago, but there's an annoying little problem I'm seeing, and since I bought the 777 this weekend, it's become more prominent.  

If I left-click a knob--say the AP heading set knob--it moves the knob one notch as expected.  But if I left-click and hold the same knob, after about a second the pointer becomes non-responsive for anywhere from 1-8 seconds.  Can't move it on-screen.  The "click" stays held by the system until that 1-8 seconds passes, and then it resumes like normal.  The application doesn't seem to become unresponsive--everything else within the sim continues without issue.  On the 777, the click continues to be registered the entire time, so if I'm trying to change the A/P heading from 310 to 300, it gets "stuck" and the heading display keeps turning until the click stops being registered (and the heading ends up around 120 or so).  

I figured this was a bug with the 777 aircraft, but I see similar behavior in both the stock 747 and Cessna that shipped with X-Plane (both of those I tested loading in KSEA as a start point).  I thought also that it might be a bug with my input device (I use a Wacom tablet instead of a mouse), but when I unplugged that and tried with the Apple "Magic Trackpad 2", I saw the same behavior.  I tried unplugging the joystick, but that doesn't stop it.  And it happens both in the straight-ahead view (keystroke 'w') and the free-camera view (shift-9).  

System is Mac OSX ("El Capitan", 10.11.2 Beta (15C47a); this *could* factor in, but I don't see any other issues anywhere else on the machine).  Machine is a late 2015 27" Retina 5K, 4GHz Intel Core i7, 32GB RAM, AMD Radeon R9 M395 with 2GB.  I'll paste the log.txt file below (apologies if there's a way of attaching it rather than pasting, but I didn't see one.)  Thanks in advance for any help or suggestions anyone might have!
commented by (12 points)
log.txt for X-Plane 10.42r1 (64-bit build 104200) compiled on Nov 20 2015 19:37:52
X-Plane started on Mon Nov 30 01:27:11 2015

This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.
If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.

Mac OS X: Version 10.11.2 (Build 15C47a)
CPU type: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz CPU speed (mhz): 4000 Bus speed (mhz): 100 RAM (MB): 32768

X-System folder:'/Applications/X-Plane 10/', case sensitive=0


OpenGL Vendor    : ATI Technologies Inc.
OpenGL Render    : ATI Radeon R9 M395 OpenGL Engine
OpenGL Version   : 2.1 ATI-1.40.15 (210/0)
OpenGL Extensions: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_depth_bounds_test GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector GL_APPLE_texture_range GL_APPLE_transform_hint GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators GL_APPLE_ycbcr_422 GL_ATI_blend_equation_separate GL_ATI_blend_weighted_minmax GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_fog_distance GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_barrier GL_SGI_color_matrix GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod

threaded_avail   : 1    aniso_avail      : 1    timer_avail      : 1    sync/fence       : 1
pbo_avail        : 1    frameblit_avail  : 1
gpu_shad4_avail  : 1    shad_lod_avail   : 1    array_tex_avail  : 1    texture_rg       : 1
tex_float_avail  : 1    seamless_avail   : 1    drawbuf2_avail   : 1    packed_stencil   : 1
framebuffer_srgb : 1    copy_buf_avail   : 0    ubo_avail        : 0    gshader_avail    : 1
instance_avail   : 1    dis_fog_avail    : 1    pinned_avail     : 0    debug_avail      : 0
max tex units    : 8 (16/8)
max iso filtering: 16.000000
max texture size : 16384 (hardware limit)
max point size   : 64.000000
idx in vram      : 1
GLSL Version     :1.20/120
first-gen shaders: 0
(16/4096/128/16/16/4096/4096)
This video card is: DX10 or 11 - With instancing
CPU count        : 8
OpenAL devices: Built-in Output
Open AL default device:Built-in Output
OpenAL vendor    : Apple Computer Inc.
OpenAL renderer  : Software
OpenAL version   : 1.1
OpenAL hardware  : Built-in Output
OpenAL extensions: ALC_EXT_CAPTURE ALC_ENUMERATION_EXT ALC_EXT_MAC_OSX ALC_EXT_ASA ALC_EXT_ASA_DISTORTION ALC_EXT_ASA_ROGER_BEEP AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE AL_EXT_float32 AL_EXT_STATIC_BUFFER AL_EXT_SOURCE_NOTIFICATIONS AL_EXT_SOURCE_SPATIALIZATION

Fetching plugins for /Applications/X-Plane 10/Resources/plugins

Loaded: /Applications/X-Plane 10/Resources/plugins/PluginAdmin/mac.xpl (xpsdk.examples.pluginadmin).

Loaded: /Applications/X-Plane 10/Resources/plugins/AutoGate/mac.xpl (Marginal.AutoGate).

Initializing off screen memory.
Initializing off screen memory complete.
I found the following scenery packages (prioritized in this order):
  0 Custom Scenery/__Clock Tower/
  1 Custom Scenery/KCVG - Cincinnati International/
  2 Custom Scenery/KMKE/
  3 Custom Scenery/2K Ortho-photos/
  4 Custom Scenery/A_Honolulu_PHNL_v1.3/
  5 Custom Scenery/ff_library_extended_LOD/
  6 Custom Scenery/THE-FRUIT-STAND Aircraft Library v2.2/
  7 Custom Scenery/KBOS v10/
  8 Custom Scenery/KPHX - Phoenix Sky Harbor Intl/
  9 Custom Scenery/Southwest Florida International/
 10 Custom Scenery/KFLL Fort Lauderdale-Hollywood Int'l/
 11 Custom Scenery/KMIA/
 12 Custom Scenery/KSFO - San Francisco Cable Cars/
 13 Custom Scenery/KSFO - San Francisco V2/
 14 Custom Scenery/KSFO - Traffic Golden Gate Bridge/
 15 Custom Scenery/KSFO - Traffic Oakland Bay Bridge/
 16 Custom Scenery/KLAX - Los Angeles International/
 17 Custom Scenery/KLAX - Los Angeles Orthophotos/
 18 Custom Scenery/KCAD - Wexford County/
 19 Custom Scenery/KLGA/
 20 Custom Scenery/KGRR Gerald R Ford Intl/
 21 Custom Scenery/KMDW - Chicago Midway/
 22 Custom Scenery/KMSN/
 23 Custom Scenery/LAS_North2West3_2M/
 24 Custom Scenery/LAS_NorthWest3_2M/
 25 Custom Scenery/LAS_South2West3_2M/
 26 Custom Scenery/LAS_South3West3_2M/
 27 Custom Scenery/LAS_SouthWest3_2M/
 28 Custom Scenery/LAS_West3_2M/
 29 Custom Scenery/3D_people_library/
 30 Custom Scenery/MisterX_Library/
 31 Custom Scenery/RE_Library/
 32 Custom Scenery/ruscenery/
 33 Custom Scenery/The_Handy_Objects_Library/
 34 Custom Scenery/USA_GA_KATL_Hartsfield-Jackson Atlanta Intl Airport v1.3 HD/
 35 Custom Scenery/Chicago Midway/
 36 Custom Scenery/KFNT/
 37 Custom Scenery/KLAS/
 38 Custom Scenery/OpenSceneryX/
 39 Custom Scenery/KDTW - Detroit Metro Wayne Co/
 40 Custom Scenery/KTVC - Cherry Capital Airport (Traverse City, MI)/
 41 Custom Scenery/Mackinac Bridge/
 42 Custom Scenery/KGRR - Grand Rapids/
 43 Custom Scenery/Aerosoft - EBBR Brussels/
 44 Custom Scenery/Aerosoft - EDDF Frankfurt/
 45 Custom Scenery/Aerosoft - EDDM Munich/
 46 Custom Scenery/Aerosoft - EDDT Berlin Tegel/
 47 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/
 48 Custom Scenery/Aerosoft - EGBB Birmingham/
 49 Custom Scenery/Aerosoft - EGKK London-Gatwick/
 50 Custom Scenery/Aerosoft - EGLL Heathrow/
 51 Custom Scenery/Aerosoft - EGPF Glasgow/
commented by (12 points)
52 Custom Scenery/Aerosoft - EGSS London-Stansted/
 53 Custom Scenery/Aerosoft - EIDW Dublin/
 54 Custom Scenery/Aerosoft - LEBL Barcelona/
 55 Custom Scenery/Aerosoft - LEMD Madrid/
 56 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/
 57 Custom Scenery/Aerosoft - LFPG Paris CDG/
 58 Custom Scenery/Aerosoft - LFPO Paris Orly/
 59 Custom Scenery/Aerosoft - LPFR Faro/
 60 Custom Scenery/Aerosoft - LSGG Genf/
 61 Custom Scenery/Global Airports/
 62 Custom Scenery/KSEA Demo Area/
 63 Custom Scenery/KSEA Demo Terrain/
 64 Custom Scenery/LOWI Demo Area/
 65 Global Scenery/Bug Fixes/
 66 Global Scenery/Extra Islands/
 67 Global Scenery/Recuts 1030/
 68 Global Scenery/X-Plane 10 Global Scenery/
 69 Resources/default scenery/1000 autogen/
 70 Resources/default scenery/1000 decals/
 71 Resources/default scenery/1000 forests/
 72 Resources/default scenery/1000 roads/
 73 Resources/default scenery/1000 urban terrain/
 74 Resources/default scenery/1000 world terrain/
 75 Resources/default scenery/700 roads/
 76 Resources/default scenery/900 beaches/
 77 Resources/default scenery/900 europe objects/
 78 Resources/default scenery/900 forests/
 79 Resources/default scenery/900 roads/
 80 Resources/default scenery/900 us objects/
 81 Resources/default scenery/900 world object placeholders/
 82 Resources/default scenery/airport decals/
 83 Resources/default scenery/airport scenery/
 84 Resources/default scenery/default apt dat/
 85 Resources/default scenery/default atc/
 86 Resources/default scenery/sim objects/

0:00:00.000 D/HID: HID Bridge Running
Fetching plugins for Custom Scenery/KPHX - Phoenix Sky Harbor Intl/plugins

Loaded: Custom Scenery/KPHX - Phoenix Sky Harbor Intl/plugins/GroundTraffic/mac.xpl (Marginal.GroundTraffic.KPHX - Phoenix Sky Harbor Intl).

Fetching plugins for Custom Scenery/KSFO - San Francisco Cable Cars/plugins

Loaded: Custom Scenery/KSFO - San Francisco Cable Cars/plugins/GroundTraffic/mac.xpl (Marginal.GroundTraffic.KSFO - San Francisco Cable Cars).

Fetching plugins for Custom Scenery/KSFO - San Francisco V2/plugins

Loaded: Custom Scenery/KSFO - San Francisco V2/plugins/GroundTraffic/mac.xpl (Marginal.GroundTraffic.KSFO - San Francisco V2).

Fetching plugins for Custom Scenery/KSFO - Traffic Golden Gate Bridge/plugins

Loaded: Custom Scenery/KSFO - Traffic Golden Gate Bridge/plugins/GroundTraffic/mac.xpl (Marginal.GroundTraffic.KSFO - Traffic Golden Gate Bridge).

Fetching plugins for Custom Scenery/KSFO - Traffic Oakland Bay Bridge/plugins

Loaded: Custom Scenery/KSFO - Traffic Oakland Bay Bridge/plugins/GroundTraffic/mac.xpl (Marginal.GroundTraffic.KSFO - Traffic Oakland Bay Bridge).

Fetching plugins for Custom Scenery/KLAX - Los Angeles International/plugins

Loaded: Custom Scenery/KLAX - Los Angeles International/plugins/GroundTraffic/mac.xpl (Marginal.GroundTraffic.KLAX - Los Angeles International).

Syntax error - unknown glyph at ^R}
Parse error: no closing brace.
 (in sign '{@L}C4{@R}27-9{@@}{@L}C4{@Y,^l}C{^R}' from airport KFNT:Custom Scenery/KFNT/Earth nav data/apt.dat)
ATC audio initialized.
0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 1.
0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 1.
0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 1.
0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.
0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.
0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 0.
0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.
0:00:00.000 I/REN: Setting |number of trees read from prefs as 2.
0:00:00.000 I/REN: Setting |number of objects read from prefs as 3.
0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.
0:00:00.000 I/REN: Setting |number of cars read from prefs as 3.
0:00:00.000 I/REN: Setting |world detail distance read from prefs as 3.
0:00:00.000 I/REN: Setting |airport detail read from prefs as 3.
0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 0.
0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.
0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 1.
0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.
0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 1.
0:00:00.000 I/REN: Setting |shadow detail read from prefs as 1.
0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 0.
0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 1.
0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 1.
0:00:00.000 I/REN: Setting |Extended DSF Scenery read from prefs as 0.
0:00:00.000 I/NET: Skipping interface lo0, flags=8049
0:00:00.000 I/NET: en0    : 10.0.0.173
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at WSAC and WSSS!
0:00:00.000 W/ATC: Rewrote WSAC atc_ControllerRole_Gnd's freq: 12172 to 11800 for being in conflict!
0:00:00.000 D/State: Received: 0:0
0:00:00.000 D/HID: Hardware ADDED(046d, c215) - Logitech Extreme 3D at path USB_046d_c215_none_14200000_0001_0004
0:00:00.000 I/JOY: REGISTER Joystick device: Logitech Extreme 3D - VID:1133PID:49685, this is a familiar device.
0:00:00.000 D/HID:     AXIS Added Index: 0 (0001, 0030) for handle: 0x00f72560. Min/Max 0 - 1023
0:00:00.000 D/HID:     AXIS Added Index: 1 (0001, 0031) for handle: 0x00f72560. Min/Max 0 - 1023
0:00:00.000 D/HID:     HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x00f72560. It has 8 positions.
0:00:00.000 D/HID:     AXIS Added Index: 2 (0001, 0035) for handle: 0x00f72560. Min/Max 0 - 255
0:00:00.000 D/HID:     AXIS Added Index: 3 (0001, 0036) for handle: 0x00f72560. Min/Max 0 - 255
0:00:00.000 D/HID:     BUTTON Added Index: 0 (0009, 0001) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 1 (0009, 0002) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 2 (0009, 0003) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 3 (0009, 0004) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 4 (0009, 0005) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 5 (0009, 0006) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 6 (0009, 0007) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 7 (0009, 0008) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 8 (0009, 0009) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 9 (0009, 000a) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 10 (0009, 000b) for handle: 0x00f72560
0:00:00.000 D/HID:     BUTTON Added Index: 11 (0009, 000c) for handle: 0x00f72560
0:00:00.000 D/HID: END HARDWARE
0:00:08.360 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/B747-400 United/747-400 United.acf
Fetching plugins for /Applications/X-Plane 10/Aircraft/Heavy Metal/B747-400 United/plugins

Loaded: /Applications/X-Plane 10/Aircraft/Heavy Metal/B747-400 United/plugins/systems/mac.xpl (jrollon.plugin).

Clean exit from threads.
0:00:08.360 E/SCN: Failed to find resource 'Panel.png', referenced from file 'Aircraft/Heavy Metal/B747-400 United/'.
0:00:08.360 E/SCN: Failed to find resource 'Panel.png', referenced from file 'Aircraft/Heavy Metal/B747-400 United/'.
0:00:08.360 I/FLT: Init dat_p0 type:loc_ram apt:KSEA rwy:16L
0:00:08.360 I/SCN: DSF load time: 37457 for file Custom Scenery/Global Airports/Earth nav data/+40-130/+46-122.dsf (0 tris)
0:00:08.360 I/SCN: DSF load time: 147344 for file Custom Scenery/Global Airports/Earth nav data/+40-130/+46-124.dsf (0 tris)
0:00:08.360 I/SCN: DSF load time: 1869368 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+46-122.dsf (190326 tris)
commented by (12 points)
0:00:08.360 I/SCN: DSF load time: 1788936 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+46-124.dsf (198770 tris)
0:00:08.360 I/SCN: DSF load time: 1806390 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+47-122.dsf (233697 tris)
0:00:08.360 I/SCN: DSF load time: 1414710 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+47-124.dsf (229133 tris)
0:00:08.360 I/SCN: DSF load time: 19858 for file Custom Scenery/Global Airports/Earth nav data/+40-130/+46-123.dsf (0 tris)
0:00:08.360 I/SCN: DSF load time: 1681945 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+46-123.dsf (184346 tris)
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Modern_Airports/Control_Towers/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Vintage_Airports/Control_Towers/'.
0:00:08.360 I/SCN: DSF load time: 231166 for file Custom Scenery/Global Airports/Earth nav data/+40-130/+47-123.dsf (0 tris)
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 W/OBJ: The object Custom Scenery/KSEA Demo Area/KSEA_objects/ConCSlantRoof.obj has a first LOD near distance of 2000.000000 but it should start at 0!
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Custom Scenery/KSEA Demo Area/KSEA_objects/'.
0:00:08.360 I/SCN: DSF load time: 403169 for file Custom Scenery/KSEA Demo Area/Earth nav data/+40-130/+47-123.dsf (0 tris)
0:00:08.360 I/SCN: DSF load time: 2791845 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+47-123.dsf (243770 tris)
0:00:31.353 D/State: Received: 0:6
0:00:31.963 I/ACF: Loading airplane number 1 with Aircraft/General Aviation/KingAir C90B/KingAirC90B.acf
0:00:31.963 I/FLT: Init dat_p1 type:loc_general_area lat:47.842999 lon:-122.832275 ele(ft):15441.148438 psi:20.615124 spd(kts):172.798599
0:00:31.963 I/ACF: Loading airplane number 2 with Aircraft/Helicopters/Bell 206/Jetranger.acf
0:00:31.963 I/FLT: Init dat_p2 type:loc_general_area lat:47.986210 lon:-121.565186 ele(ft):14600.254883 psi:206.508423 spd(kts):34.580418
0:00:31.963 I/ACF: Loading airplane number 3 with Aircraft/General Aviation/P180 Avanti Ferrari Team/avanti.acf
0:00:31.963 I/FLT: Init dat_p3 type:loc_general_area lat:46.974922 lon:-121.559822 ele(ft):18841.605469 psi:349.282684 spd(kts):197.998093
0:00:31.963 I/FLT: Init dat_p1 type:loc_ram apt:KSEA rwy:16C
0:00:31.963 I/ATC: p1(N01XP) FP filed - KSEA to KMFR at 23000 via YKM BTG JOREM RBG , type=2
0:00:31.963 I/ATC: p2(N02XP) Popup FP filed to KSEA at 5000 via , type=2
0:00:31.963 D/ATC: Validating altitude for p2(N02XP): filed: 5000 usable_rte_dist: 11.502078 maxDescent: 2000 maxAlt: 3000 minAlt: 5000 chosen_alt: 3000
0:00:31.963 D/ATC: p2(N02XP): Cleared IFR
0:00:31.963 I/FLT: Init dat_p2 type:loc_specify_lle lat:47.264595 lon:-122.536446 ele(ft):5000.000000 psi:24.000000 spd(kts):97.759834
0:00:31.963 D/ATC: p2(N02XP): FlyToPoints
0:00:31.963 D/ATC: p2(N02XP): Maintain 2998ft
0:00:31.963 I/FLT: Init dat_p3 type:loc_ram apt:KSEA rwy:16R
0:00:31.963 I/ATC: p3(N03XP) FP filed - KSEA to CYQQ at 20000 via YVR , type=2
0:00:37.310 D/ATC: Validating altitude for p3(N03XP): filed: 20000 usable_rte_dist: 144.239822 maxDescent: 36000 maxAlt: 36000 minAlt: 20000 chosen_alt: 20000
0:00:37.310 D/ATC: p3(N03XP): Cleared IFR
0:00:37.310 W/ATC: Frequency 11920 for flow Calm and South flow runway 16L at KSEA seemed invalid and was overwriten!
0:00:37.310 D/ATC: p3(N03XP): Squawk 4700
0:00:37.310 D/ATC: p2(N02XP): Fly Heading: 353
0:00:37.310 D/ATC: p2(N02XP): Maintain 5000ft
0:00:38.517 D/ATC: Validating altitude for p1(N01XP): filed: 23000 usable_rte_dist: 384.556305 maxDescent: 96000 maxAlt: 97000 minAlt: 23000 chosen_alt: 23000
0:00:38.517 D/ATC: p1(N01XP): Cleared IFR
0:00:38.517 D/ATC: p1(N01XP): Squawk 4701
0:00:38.584 I/ATC: Adding p3(N03XP) into Active Queue
0:00:38.584 D/ATC: p3(N03XP): Taxi (2 points issued)
0:00:38.614 D/ATC: p1(N01XP): Taxi (24 points issued)
0:02:40.480 D/ATC: p3(N03XP): Takeoff: 16L
0:02:44.655 I/JOY: UNREGISTER Joystick device: Logitech Extreme 3D - VID:1133PID:49685
0:02:44.655 D/HID: HID Bridge Shutdown
----- X-Plane has shut down -----

1 Answer

0 votes
answered by (19.3k points)
Hi benscripps,

Our general advice re: El Capitan is "don't use betas". :-D

I certainly don't see this issue in my X-Plane on Yosemite, using a USB mouse. I tried the default Cessna & the Ramzzess 777. There was a little lag in the number display when I held the left mouse button, but I could still move the pointer.

For future reference, you can upload a file by clicking on the image link and using the third tab to upload it to the server. It's not very self-evident, I know.
commented by (12 points)
Thanks for that--I had installed the beta on my old Mac, and it came over when I migrated to the new Mac; this was all well before I'd even thought about downloading X-Plane in the first place.  I'll just work around it until beta advances to release and then think about it some more.  

I've a spare mouse at work, but I'm off all week.  I'll have to see what happens with a mouse and/or once the OS reaches a more final build.  Any thoughts as to, should it continue through both of those things, better to report it as a bug or post again here?   I'm still fairly new to the whole X-Plane arena, so I'm still getting the hang of what goes where...:-)

And thanks for the tip on posting the file--glad it wasn't sitting there staring me in the face the whole time...
commented by (19.3k points)
I updated my iMac to El Capitan today since so many X-Planers are getting it. I still do not see my mouse freezing if I click and hold the left button in either the default Cessna or 747. A note on the  777 though--I learned the hard way that it is a SASL plane which has a known issue with El Capitan. :-D Our developer site has  blog posts on this issue if you'd like more information: http://developer.x-plane.com/2015/09/mac-issues-sasl-crashes-and-red-lines/
commented by (12 points)
Sorry for bumping this thread, but I wanted to add a little bit more information in case anyone stumbles across the same issues I'm seeing.  

My system has now been bumped up to the "final" release of El Capitan 10.11.2, so it's no longer in beta.  (I know that doesn't automagically qualify X-Plane and its aircraft files for perfect use, but...)  

But I also thought I'd take a shot at the "nuclear option": I backed up, then reformatted my system's hard drive and reinstalled OSX from scratch.  (What with the way OSX updating works, it's probably been nearly a decade since I installed a fresh copy of the OS.)  Anyway, I reinstalled, had a brand spankin' new copy of the OS; the first thing I installed was X-Plane.  Literally nothing other than the OS and its native apps was installed; no third-party applications, no extra drivers, nothing but the OS, its bundled applications, and X-Plane.  I opened X-Plane, loaded the bundled Cirrus Thejet (I'd tried this one before as well and saw the click-lock there), and saw exactly the same click-lock behavior using the trackpad.  (I've since reformatted again and restored my backup.)  But I like to think that more or less rules out any third-party driver incompatibility or legacy junk in the system.

One other thing I should mention: I've since figured out that when the pointer gets "stuck" within X-Plane, if I cmd-tab switch to another application on the system, the pointer will start moving again immediately, but the locked mouseDown within X-Plane continues in the background.  (That is to say, if the click gets locked on the A/P heading selector and I cmd-tab switch out to Finder, I can start moving the pointer and clicking on things on the desktop, but the A/P heading keeps changing in the background.)  When I cmd-tab back into X-Plane, the pointer again becomes locked until it finally releases the click.  It seems to me that whatever is happening is definitely happening within X-Plane rather than in the OS itself.

So...I've filed it as a bug report with the form on the support page; hopefully they'll be able to reproduce it there and track it down.  Thanks again for your help!

Welcome to X-Plane Q&A, where you can ask support questions and get answers from members of the community.

This site is for X-Plane support questions only. Please search for existing answers before posting your question. Off-topic questions will be locked.

If you’re new, you’ll need to register before asking your first question.

If your question is answered, click on the check mark to select the best response.

Categories

...